Entries in iphone 6 (9)


Is Tekdry a scam? The truth behind the water damage repair machine



If you've ever gotten your favorite mobile device wet, you've certainly tried the rice trick (which has been proven to be moot)


Surely there has to be a easy fix right? The short answer is no, but that's not what a new emerging tech company called "TekDry" wants you to think. 

Tekdry has built and developed a machine that allows you to take a device that has been submerged in liquid (most commonly water) 


The premise behind tekdrys machine is that by using a combination of heat, vacuum and liquid absorbing pellets it can dry out and remove the remaining liquid leftover in the device.


It's even gained popularity from shows such as "Shark Tank"


Investors have put lots and lots of money into trying to push this water damage repairing machine in retail outlets and have rolled it out into over 600 stores nationwide at select Staples.


So with all the popularity and "success" with retail outlets one must ask does it really work?


Why is tekdry a scam?


Truth be told the machine itself is not a "scam" in the traditional sense, matter of fact in the machine fails to save your device or restore full functionality then typically they will charge you little to nothing.

Reading the points made by the company, they make some bold claims:


The water removal process causes no cosmetic damage whatsoever"


If the process is successful, your data will be exactly as it was"


You can feel good knowing the process does not use chemicals"


We will not have to take your device apart to save it"


While some of the claims are true, they are preying on the uneducated customers and overselling the machines capabilites. It's important to understand more about eletronics and what happends when they come in contact with liquid. 


Let's start out by showing a typical liquid damaged motherboard 

iphone 6 liquid damage


As you can see lots of coroison has formed around the connectors, specificlly the digitizer and rear camera fpc conn. (flexiable printed circuit).

This is typically what we see at wires computing when we are sent a device for liquid damage repair. The corrosion forms around high voltage areas such as the VCC_main power rail and the backlight rail which can run at 4 volts during a screen on event. This often results in burned pads the components are soldered to, which will cut off any connection to the circuit. 

When we take in a device in a state such as this we will take pictures for reference and then match them up with schematics to check for burned pads and "dead circuits." This is critical for ensuring proper thorough repairs. We also note areas that are affected more than others so we can spend more time with the smd componets later. 


What does tekdry do about corrosion? The short answer is nothing.

-Imagine going for a run, getting dirty and taking a shower with your clothes, shoes and hat on. Will you be cleaning yourself properly in all the important areas? No.

-Imagine driving your car through a mud pit and then going to the car wash, only for them to tell you that all they do is lightly blow air at it and throw a few towels on it to absorb some moisture. Would this be a proper thorough cleaning? No.

This is what tekdry does. They receive a device that's been wet, without disassembling it throw it into the machine, blow some air at it and expect it to be fixed in a matter of minutes. 


What most don't understand about electronics and liquid is that the damage isn't caused by water, It's caused by the leftover [mineral] contaminants in the water and shorting out circuits and burning solder pads that are necessary for connection. 

As part of our cleaning process we will disassemble the whole device to gain access to the motherboard (the brain) then we will use our ultrasonic machine to clean the motherboard and remove the residual corrosion. This process involves getting the motherboard wet again(!) Most would think this is foolish, but the secret is in the liquid we use, which has almost no contaminants and does not allow electrolysis to occur. 

Cleaning the motherboard is only half the battle. Replacement and rebuilding of the circuits is typically needed for a device to function. Capacitors on the VCC_main power rail can be the first to short out and cause the phone not to boot. As a capacitor has one leg on ground and another on the the circuit, if a capacitor gets corroded and shorts out then effectively a whole circuit can be shorted to ground causing vital circuits to not connect. This can be as minimal as a camera LDO (A low-dropout regulator) or as important as a PP1V8 line sending power to the NAND or CPU.

In most cases we need to remove components to replace or repeal them. Luckily not every capacitor is needed on the VCC_main power rail given that they function to filter the noise and are not esstential. But in the event a capacitor is shorted on a circuit such as the camera ldo then you would never gain access to either of the cameras without micro-soldering and removing them. 


TEKDRY (or Staples) does not remove any components, nor do they have the ability to micro solder anything and replace surface mounted parts on a motherboard. So how could they expect a postive outcome from this external "blow dry?" Truth is it would have [partially] worked and the machine simply sped that process up. 

Without removing the power [battery] the phone is still getting power through the circuits even when its turned off, only exacerbating the corrosion, shortening the lifespan of the device.

The fact is if your device has gotten wet, then you need to get it inspected under a microsope so that proper repairs can be performed.

Not every device is fixable, this is highly dependant on the localization of the damage and the steps the user has done to mitigate any further damage. 75% of the time a device is fixable, but most do not realize this and simply throw it away or store it in a drawer for years, while the coroson sets in even more and then lessening the chances of a sucessful revival. 

If you have gotten your device wet and would like a repair please use the link below:

Water Damage Repair Services


iPhone won't charge after using a mini fan

 It's summer and its hot! As most of us find ways to beat the heat and cool down, this often lands us to searches on the internet. One ponders It's 2017, there must be a way to use my iPhone to cool myself down!?


Some have stumbled upon a portable mini lightning fan for iPhone as shown below


iPhone mini fan

  • For most Apple iPhone users alike this fan that plugs into the bottom of your phone and cools you down almost anywhere might seem like a great idea, but it has a hidden problem. 

These small portable mini lightning port fans cause charging problems on the iPhones.



Take a look at some of the comments made from users of the product:


"My sister bought this mini fan $ 1 that plugs into the port of loading of your iPhone and the fan uses the iPhone's battery to do the fan moving.  Today I plugged my iPhone with the fan and the fan started spinning and then all of a sudden it just stopped, my sister was in the room and said "Oh that happened when I used it and now my phone won't load" so I went and tried to plug it into a wall charger and it would not load the only way that load right now is in having plugged into the computer. "


"bought 2 of these and both of them caused both of my phones to stop charging. The fan didn't work and as soon as I plugged my charger up it wouldn't charge."


"Fan no longer works with iOS10 release. It causes the phone to become completely unresponsive until you unplug it. I've also had it 'restart' my iPhone 6S Plus on occasion as well.

(+): It's a conversation piece, no noticeable battery drain, somewhat works for the price

(-): Doesn't work with most phone cases (similar to aftermarket Lightning cables), lower half of the phone is unusable because the blades cover it, fan speed varies, probably due to a poor connection and/or unbalanced blades.

Overall, for cost, you can't expect much. It works, just not well. I don't see how anyone could find this practical. I thought I'd use this on our trip to Disneyworld, but it was not worth the hassle."



As we've found out from our recent post about iPhones charging and the Tristar charging ic chip that can go bad.


When the fan is plugged into the lightning port it will typically spin for about 30 seconds to 1 min. Once the fan stops spinning the user will usually remove the fan by unplugging it then re-inserting it  back into the device.

What the user is not aware of is that throughout the process of the fan drawing current from the battery, it also provides a feedback loop into the charging circuit causing the tristar charging ic to get ruined.

iPhone Tristar IC

As most users might worry the phone needs to be plugged into itunes to fix the phone, this unfortunately will do no good. Once the charging ic has been damaged you may expierence issues such as:

  • Not charging
  • "Fake Charging"
  • Not turning on
  • Boot-Looping
  • iTunes not recognizing iPhone


Fortunately for all of our customers the phone is not ruined! It simply needs a new tristar charging ic chip installed which involves micro soldering.



All iPhones have a charging ic known as the tristar which means all phones will be affected by this problem. But luckily this means the repair process is the same for each model, even if you have an iPhone 5S, iPhone 6, iPhone 6S or even iPhone 7.


 We are able to perform these repairs within 2-3 business days. Nothing on the phone will be deleted and it will function normally after the repair. We would however check to make sure this is the problem before performing the repair.


Burlington, Vermont U2 Tristar Repair Service

Give us a call today!



To get your device repaired simply create a ticket on our site and mail it into us for repair via our page.


iPhone Tristar IC Mail-in Repair Service.


Secrets Your Mobile Phone Insurance Company Doesn't Want You To Know

Asurion is a company that works with three of the big United States carriers: Verizon, AT&T and Sprint as their officially endorsed subscriber phone insurance provider. Asurion covers loss, theft, accidental damage, and malfunction—the major things that people typically file claims for. Once the insurance claim is approved you'll be told if Asurion is electing to repair or replace the device— and you don’t get to have any say. If it's the latter, they'll ship it out to you overnight. A phone charger, battery, and a SIM card will be included. It may be new, or it may be refurbished. They do not feel obligated to openly inform you as to which you are receiving, but if it’s a refurbished phone it should have “Refurbished by Asurion” on the back of the phone.

Right from the start it’s easy to see how mobile phone insurance is a scam. The people that work in the carrier stores don’t know the details about how Asurion works as an insurance company, and are primarily motivated by the commission that they receive to by adding subscribers. They aren’t really sure whether or not the insurance is worth it but they know that they gain financially by telling you that it’s a must-have. 

The promise of phone insurance and the reality of it are vastly different. Most people seem to think that if they “break” their phone the insurance is there to replace it with a brand new one. For some, a “broken phone” is really just a shattered screen that could have been replaced at a repair shop for about $100, but instead they send it off to Asurion and have their phone (that had a perfectly functional motherboard and had never seen a drop of water) replaced with a “Refurbished by Asurion” phone whose mobo was shoddily repaired after liquid damage by a half-rate technician contracted by the company to mass repair boards collected from other phones sent to the company from customers that don’t really seem to understand what their phone is worth.

To make a point, a customer could bring a phone into Wires Computing and have us put their motherboard into a different frame that’s in decent shape, with a new charging port, battery and LCD, and they would likely be charged less than $200 depending on the model of iPhone. Alternatively, a person could send out their phone that merely has a cracked LCD and be charged between $150 to $200 depending on the deductible to replace it with a refurbished phone containing an older, previously repaired motherboard. The motherboard in the original phone was flawless, and should have been the part of the phone most valued— and now it is the property of Asurion.

These “insurance phones” are reassembled with replacement copy parts by glorified assembly-line workers. We have seen Asurion phones come into the shop that are taped together behind the LCD, with screws left out or loose in the phone. Unlike the repair shop setting, these people don’t know the customers that are receiving the phones and so they are much less invested in doing a good and thorough job. The longevity of these phones is greatly compromised— and to make matters more difficult, any boards that have been soldered during the refurbishment process no longer have the original clues of corrosion, making it much more difficult for even a highly experienced micro-soldering repair technician to return a compromised motherboard to full function. 


Most replacement phones have less than new parts in them that fail pre-maturely and are simply not the same quality of parts a local tehcnician would use. We often see our customers come into the shop with something broken on the asurion replacement phone and after opening it find many issues. Some even being 2-3 year old batteries that have half the life that the original phone had. Adding all the problems up with the phones that are replaced make it surely a crap shoot as to how long they will last. This is often the first time the customer is aware of this, making them wish they had just gotten the phone fixed properly at our local repair shop instead of dealing with a mess of a phone from a big cororation that cares ultimatly only about the bottom line instead of quality phones and parts.


To summarize the main points of this article, phone insurance isn’t what you think it is, and rarely is it worth it. Not only do repair shops pay more attention to each individual phone and customer that come through the door, but they have well-trained staff that do a better job in the first place, with the intention of maintaining the phone’s longevity. 


iPhone battery symbol not charging

 Plauged with an iPhone 5, iPhone 6, or 6S that does not charge even after a battery replacement and/or a new charger port install?


This may be the result of a charging ic on the motherboard typically referred to as the U2 or tristar.

This issue is normally caused by using cheaper third party charger that does not regulate the voltage and as such spikes in the voltage will ruin the charging integrated circuit.


Charging your iPhone using a third party charger or USB lead that does not regulate this as much allows for larger variables in voltage and current, this then damages the U2 IC and can leave you with a seemingly dead iPhone. Another common reason for this is also charging your iPhone from the cigarette lighter of your car. This does not regulate the voltage as well as the original AC adapter as the power is coming from the alternator. If you need to charge our iPhone or any electrical equipment in your car we would recommend a good quality inverter with your original charger and USB lead.


Having a phone that won’t charge or turn on is one thing, but knowing that there’s a chip inside that’s damaged and preventing it from turning on is an entirely different frustration. But, knowing is half the battle, both when it comes to the cables being used and the steps needed to fix it. Did you ever suffer from an iPhone  that wouldn’t turn on, or charge over 1%?


  • Take a look at Micro Soldering Repair's write-up about this issue:

iPhone Tristar Replacement


iPhone Battery Swollen Fix

Do you have an iPhone 5, 5C or iPhone 6 that has decreased battery life and is now puffy and swollen to the point it has pushed your screen out and even cracked it?



This is a typical issue faced with mobile devices that have lithom ion polymer batteries.

Every iPhone device has a Li-ion battery inside and eventually it will need to be replaced. Typically most batteries are only rated at about 600-700 charge cycles, after or even before this time the battey life will be much shorter then it used to be. It may also get a bit warm as the cells inside the battery wear out.

A cycle is considered when a charge from <5% - 100%

Occassionly when the cells get worn out from so many charge and discharge cycles it can swell up in the phone causing it to damage or even crack the screen.


Unfortunately when this happends, not only does the battery need to be replaced, but the lcd screen assembly as well. When the screen is being pushed out it will crack and ruin the sensitive under part of the screen which can often result in no image on the device also.


If you need a battery replacement on your mobile device or iPhone, be sure to contact us today for this repair which takes no more then 30mins. No appointments are needed and we stock many iphone and batteries in house to allow for fast repairs!