This repair takes about 1 hour to complete and micro soldering is required to attach the new port into the motherboard. Some phones have soldered on ports and some have daughter boards that can be removed separately and replaced.
Read More
This week in micro soldering repairs we came across a Samsung Galaxy Tab 3 10.1 GT-P5210 that had its battery replaced and the battery connector was loose. This was a result of a failed attempt of a DIY battery replacement. After getting the motherboard under the microscope we noticed all the pins were de-soldered from the board and needed micro soldering to re-attach them. Hot air would not be suitable in this situation due to the close proximity of plastic and other smd components.
We were able to capture the repair on video to show the whole process that was performed during this micro soldering repair service which took less than 15mins from start to finish.
Read More
The computer had been exposed to liquid, building corrosion around the lvds connector and caused the pins to short out. After running the motherboard through the ultrasonic cleaner, the fragile pins were nudged off the board and needed a new lvds connector.
This repair is common after a computer has liquid exposure damage. Causing the shorts and burning the pins.
If you have gotten your computer wet and need a cleaning service, bring it to Wires Computing to be professionally cleaned with our ultrasonic cleaner and we will inspect and replace any component with our micro soldering tools.
After cleaning the board and replacing the connection it now looks like this:
Read More
We have the industry’s best mobile schematics repair tool to fix all your devices from iPhones, iPads, iPods, Samsung, HTC and more.
ZXW Tools helps you resolve component level issues on motherboards while you are micro soldering.
If you need micro soldering services for your device, contact us today
Read More