This repair takes about 1 hour to complete and micro soldering is required to attach the new port into the motherboard. Some phones have soldered on ports and some have daughter boards that can be removed separately and replaced.
Read More
This week in micro soldering repairs we came across a Samsung Galaxy Tab 3 10.1 GT-P5210 that had its battery replaced and the battery connector was loose. This was a result of a failed attempt of a DIY battery replacement. After getting the motherboard under the microscope we noticed all the pins were de-soldered from the board and needed micro soldering to re-attach them. Hot air would not be suitable in this situation due to the close proximity of plastic and other smd components.
We were able to capture the repair on video to show the whole process that was performed during this micro soldering repair service which took less than 15mins from start to finish.
Read More
The problem that typically causes this is bad solder joints under one and/or both of the touch ics on the motherboard. The intergrated circuits using a BGA (ball grid array) of solder balls and often when the phone is slightly bent or dropped then these connections can become jossled and lose connection which results in spotty or little touch response on the screen.
Read More
Most repairs are done in 45mins or less and we carry a large stock of parts to fix most common issues with your device.
Home Button Repairs
Cracked Screen Repairs
Charger Port Repairs
Backplate Repairs
Camera Repairs
Button Repairs
Speaker Repairs
Liquid Damage Repairs
Software updates and jailbreak services
iOS Unlock/restore services
The computer had been exposed to liquid, building corrosion around the lvds connector and caused the pins to short out. After running the motherboard through the ultrasonic cleaner, the fragile pins were nudged off the board and needed a new lvds connector.
This repair is common after a computer has liquid exposure damage. Causing the shorts and burning the pins.
If you have gotten your computer wet and need a cleaning service, bring it to Wires Computing to be professionally cleaned with our ultrasonic cleaner and we will inspect and replace any component with our micro soldering tools.
After cleaning the board and replacing the connection it now looks like this:
Read More
We have the industry’s best mobile schematics repair tool to fix all your devices from iPhones, iPads, iPods, Samsung, HTC and more.
ZXW Tools helps you resolve component level issues on motherboards while you are micro soldering.
If you need micro soldering services for your device, contact us today
Read More
Does your iPhone have issues charging? We can fix that for you! Forget the struggle of charging it, get it fixed quickly at Wires Computing. Repairs take about 45mins and done on the spot. Contact us today or stop in. No appointments needed. (802)448-0403
Read More
at Wires Computing we offer board level solder repairs for most devices. We have the tools to the repair most technical repairs!
Below is a list of the common repairs we fix:
iPhone 6 Plus Touch IC Replacement
Nexus 5 Power Button Repair
iPhone 5 Series U2 IC Replacement
iPhone 4S No WiFi Fix
Sony Z3V Wifi Repair
Samsung Galaxy S3 Power Button Repair
iPhone 5S 5002 NAND Repair
Samsunng Galaxy S3 Charger Port Repair