The promise of phone insurance and the reality of it are vastly different. Most people seem to think that if they “break” their phone the insurance is there to replace it with a brand new one. For some, a “broken phone” is really just a shattered screen that could have been replaced at a repair shop for about $100, but instead they send it off to Asurion and have their phone (that had a perfectly functional motherboard and had never seen a drop of water) replaced with a “Refurbished by Asurion” phone whose mobo was shoddily repaired after liquid damage by a half-rate technician contracted by the company to mass repair boards collected from other phones sent to the company from customers that don’t really seem to understand what their phone is worth.
Read MoreFor more optimal battery life, one might want to replace their battery yearly, especially people living in colder climates. It's one of the cheaper services that are offered and can help to maintain proper phone function as well as prevent some of the damage that can be caused by a battery going bad (i.e. bloating up and cracking your LCD).
Technicians at Wires Computing replace batteries (and charging ports) daily, and would be more than happy to assist you in servicing your phone. No appointment needed— feel free to just drop in during our regular business hours.
Read MoreAny knowledgeable electronics repair shop should be able to pretty quickly determine the source of the issue by observing if the phone draws any current with an ammeter, dry-fitting a new charging port and new battery, and observing the response through the ammeter.
A bad tristar might still result in the phone drawing current, but won't allow the battery to charge. To be certain, a known working battery might be dry-fit onto the phone and if the phone still won't charge the new battery, then a tristar repair is indicated.
Read MoreRegardless of the issue, even if you have an older or newer Surface model, feel free to give us a call or drop by our shop. Most of our repairs can be completed within a few business days, at a cost far less than that of a new device.
Read MoreAt Wires Computing we will fix any problems relating to your broken screen on your laptop. When your screen is broken it can show many different symptoms such as:
Cracked LCD
Broken Glass
Lines in LCD
Black Screen
No Image
Flash Screen
Blue Screen
White Screen
Having a phone that won’t charge or turn on is one thing, but knowing that there’s a chip inside that’s damaged and preventing it from turning on is an entirely different frustration. But, knowing is half the battle, both when it comes to the cables being used and the steps needed to fix it. Did you ever suffer from an iPhone that wouldn’t turn on, or charge over 1%?
Read MoreApple specifies that their batteries work best at a range of 0 degrees Celsius to 35 degrees Celsius. While we almost never reach the upper range in Canada, temperatures below freezing are typical for the winer months.
Because the battery meter is calibrated assuming warmer temperatures, the reduced capacity in the cold can cause the reading to be unreliable. This is one of the reasons your phone may die while still showing 30%.
Read MoreRead MoreContrary to popular belief, sim cards contain very little [if any] user saved data. The main purpose of a sim card to to authenticate your device onto the network of choice and facilitate wireless transfers to and from your device to the wireless towers in the form of data and/or voice calls.
This is a typical issue faced with mobile devices that have lithium ion polymer batteries.
Every iPhone device has a Li-ion battery inside and eventually it will need to be replaced. Typically most batteries are only rated at about 600-700 charge cycles, after or even before this time the battery life will be much shorter then it used to be. It may also get a bit warm as the cells inside the battery wear out.
Read MoreThe top 2 screws (shown in orange and yellow) screw into the frame and/or stand-off screws. The 3 screws in the bottom triangle are sitting atop the motherboard millimeters above very tiny traces that can be breached if a longer screw is used, hence the name "long screw damage". This is often caused by in-experienced technicians and/or Do-It-Yourselfers who failed to accurately keep track of the screws.
When this type of damage is done, the only method to repair the phone is micro soldering with a microscope. It is very significant and often times can completely ruin the phone. The symptoms of this damage is often: blue screen on start up, red screen on boot, no backlight, no image on boot, phone still vibrates but no image on screen.
Read MoreWires Computing offers many repairs services such as Samsung galaxy repairs
Samsung Galaxy Series Cracked Screen Repairs
Samsung Galaxy Series Charger Port Repairs
Samsung Galaxy Series Back Cover Replacements
Samsung Galaxy Series Camera Repairs
Samsung Galaxy Series Battery Replacements
Samsung Galaxy Series Water Damage Repairs
Often times the charger ports can be re-soldered onto the circuit board after disassembly. This type of repair requires micro soldering
If you need this type of repair for your device give us a call and we can take care of it for you. Often we have most common ports and parts in stock and repairs are done within 1-3 business days. If you are not located within local access to our repair shop you may also send in your device for repair.
Read MoreRead More…First it came in as a broken camera. Which is typical for a phantom 3 after a crash, but after replacing the camera it kept beeping as if it were doing a firmware update. During the phantom 3 power on it would continuously beep beep beep. So later after opening it I found a big issue which was the flight recording and "main board" was broken from all of its solder joints.
Read More…The iPhone 6 that we had showed signs of life but no display. After replacing the screen with a new one, it still showed no signs of an image. When inspecting the screen in front of a flashlight, a faint image was visible. This confirmed that the phone was on and in fact worked, but had a blown back light. For this type of repair it would require micro soldering. After checking the filters on the motherboard we found them to have continuity and functioned within specifications. At this point in the back light circuit we still had a back light display BGA IC (ball grid array integrated circuit) as well as a coil and a diode. After checking the coil, which was also found to be within specifications, we then looked to the diode. Below is the picture of the diode under the cpu heatsink.
Wires Computing offers computer repair services in our Burlington Vermont repair shop 05401 area
We can fix both Windows and Mac computers, we love them both!
Any computer issue is no problem for us, computer doesn't start, flashing question mark folder? 3 Beeps on start-up? We have the solutions for every computer issue!
Read MoreIf you have an iPhone that has no backlight this can often be the result of an improper screen replacement or previous work done on the iPhone motherboard can cause the back light to suddenly go out. Liquid damage can also cause no back lights on an iPhone.
If you are local to the Burlington repair shop you can simply stop by during our business hours and we will get the repair started. If you plan to send in your iPhone to get repair that’s great! The process to send in your iPhone with no back light is simple, start a ticket on our Send-In-Repair Page we will update you once the device is received, and then once again when the device is mailed back to you with a tracking number. This service typically takes 1-2 business days either by send in or local repairs. keep in mind this does not include return shipping transit times. We also offer expedited repairs if needed.
Read MoreDue to the iPhone 6S having a 3D touch sensor chip built into the screen assembly the prices for the parts are a bit higher then others, but are still worth getting fixed. Currently an iPhone 6S is worth about $600-$800 and at Wires Computing you can have your screen repaired for as little as $89 (as of this post) Stop into our repair shop to get your iPhone 6s repaired today!We also offer iphone charger port repairs, iphone button repairs, iphone camera repairs, battery replacements and many more!
Read MoreGot an iPad with a cracked screen? Wires Computing can fix that for you!
iPad screen repairs generally take 1-2 business days for completion due to the type of repair that is needed on these devices.
We repair all iPad screens from iPad 2, iPad 3, iPad 4, iPad Air 1/2, iPad Mini, iPad Pro
We use original parts unlike the cheap ipad repairs you find online. The reason our repairs take 1-2 days is due to the premium quality adhesive required to adhere the glass digitzer back to the frame so you dont have lifting problems after the repair. The curing time is required for a quality repair on the ipad.
Read MoreWires Computing offers 3D Printing Services in Burlington, Vt
3D Printing has a variety of uses for personal and work, we are able to print almost anything for your needs with our PLA and ABS filament. Currently we are unable to design parts and/or models, only print them.
If you would like an object printed out in 3D check out the database of projects at www.thingiverse.com
Replacement Parts
Prototyping
Designing
Testing
Toys
Tools
Please use the module below to start your 3D Print.
Please note that we only accept files in .STL format for 3D printing
Read MoreWe repair everything from:
U2 tristar IC replacement
iPhone backlight repair
iPhone not charging repair
iPhone no touch repair caused by bad touch ic
iPhone fpc repair
iPhone long screw damage
iPhone not powering on
iPhone liquid damage repair
For more info please see our full micro soldering page
Read More